| Fully Automatic
Strapping Machine |
Designed for use in fully automated conveyor lines at a factory. F112's table height is adjustable, so it can be set up to fit perfectly into an existing driven table belt or roller conveyor line. Either a driven table belt or roller conveyors are available for use on this model. |
 |
| Model |
F112 |
| Standard Arch Size |
W600×H600 |
| Machine Dimensions |
W1200×D700×H1365-1565mm
Table Height: 625-825, F112L/450～650 |
| Dispenser |
W760×D450×H850 |
| Machine Weight |
Body: 230kg Dispenser: 40kg |
| Cycle Time |
1 Strap Setting. 20 packages/minute
2 Strap Setting. 12 packages/minute |
| Strap Width |
9-15.5mm Option: 5, 6mm |
| Power |
3phase, 200/220V, 50/60Hz, 1.0kw |
|
|
| Standard Fully
Automatic Strapping Machine |
The quality of our newly designed 7110 model
together with a drivan belt conveyor is difficult to match.
With 50 strapping cycles per minute, 711A is fast and efficient.
It is easy to improve your existing conveyor line with the
high performance of 711A. |
 |
| Model |
711A |
| Standard Arch Size |
W600×H600 |
| Machine Dimensions |
W975×D630×H1520mm Table Height: 800 |
| Machine Weight |
180kg |
| Cycle Time |
1 Strap Setting. 20 packages/minute
2 Strap Setting. 12 packages/minute |
| Strap Width |
5-15.5mm |
| Power |
Single phase, 120V/60Hz, 230V/50Hz |
|
|
| Ring-Stitching
Automatic Strapping Machine |
The arch of F1133 opens and closes vertically.
It is most suitable for strapping metal hoops, wire products,
hoses and other bulky coil products. |
 |
| Model |
F1133 |
| Standard Arch Size |
W600×H400 |
| Machine Dimensions |
W1550×D1580×H2400mm Table Height: 950 |
| Machine Weight |
950kg |
| Cycle Time |
1coil/minute(4 Straps) |
| Strap Width |
9-15.5mm |
| Power |
3phase, 200V, 50/60Hz, 1.18kw |
| Air Source |
0.5MPa |
|
|
| Horizontal Pallet
Automatic Strapping Machine |
The arch of F116 lowers around pallets or
bulky loads to apply strap horizontally. F116 is especially
effective at preventing bulky pallet loads from shifting
position and falling apart. |
 |
| Model |
F116 |
| Standard Arch Size |
W1400×H1200 |
| Machine Dimensions |
W2510×D2030×H3600mm |
| Dispenser |
W900×D450×H1080mm |
| Machine Weight |
Body: 750kg Dispenser: 50kg |
| Cycle Time |
2 Strap Setting: 32 seconds/pallet |
| Strap Width |
12-16mm |
| Power |
3phase, 200V, 50/60Hz, 1.8kw |
|
|
| Vertical Pallet
Side Seal Automatic Strapping Machine |
This fully automatic strapping machine places vertical straps over the top and bottom of pallets or other extra large loads. F117K is specially designed to prevent pallets of plastic bottles, glass bottles and cans from falling apart. |
 |
| Model |
F117K |
| Standard Arch Size |
W1300×H2400mm |
| Machine Dimensions |
W2385×D550×H3165mm (FL500mm) |
| Machine Weight |
500kg |
| Cycle Time |
50 seconds/pallet(3 Strap) |
| Strap Width |
12-16mm |
| Power |
3phase, 200V, 50/60Hz, 0.9kw |
|
|
| Through-the-Pallet
Automatic Strapping Machine |
Not only can F1174 place a strap vertically through the pallet, but also around a whole palletized load. Firm, tight bundles can be produced by attaching a topmounted press. In addition, a pallet-turning mchanism can be installed for cross strapping. |
 |
| Model |
F1174 |
| Standard Arch Size |
W1400×H2100 |
| Machine Dimensions |
W4385×D695×H2935mm |
| Dispenser |
W900×D450×H1080mm |
| Machine Weight |
Body: 600kg Dispenser: 50kg |
| Cycle Time |
2 Strap through pallet: 55 seconds/pallet
2 Strap around pallet: 25 seconds/pallet |
| Strap Width |
12-16mm |
| Power |
3phase, 200V, 50/60Hz, 1.2kw |
| Air Source |
0.5MPa |
|
|
|
